1input/1output
-10V~10V
-10V~10V
24VDC
| Product Name | CZ3058 Isolator |
| Number of channels | 1 input/1 output |
| Supply voltage(Ue) | 20~35V DC |
| Weight | Approx 100g |
| Temperature drift |
100ppm/℃(－20℃～+60℃) |
| Number of channels | 1input/1output |
| Dielectric strength | 1500V AC;1minute(among power supply ,input and output ) |
| Temperature drift | 100ppm/℃(－20℃～+60℃) |
| DC transmission accuracy | ＜±0.2％F.S. |
| AC transmission accuracy | 0Hz～600Hz ±0.2％F.S.; 600Hz～10kHz －1.5％～＋0.2％F.S. |
| Response time | ＜10us |
| Insulation resistance | ≥100MΩ;500V DC(among power supply,input,output and the shell) |
| Electromagnetic compatibility | According to IEC 61326-1(GB/T 18268) |
| Weight | Approx 100g |
| Field apparatus | Vibration sensor |
| Input signal | －10V～+10V |
| Input impedance | 10kΩ |
| Voltage bandwidth | －3dB≤40kHz |
| Phase response | <10us－0.72° 200Hz;－2° 600Hz;－3.6° 1kHz;－36° 10kHz;－72° 20kHz; |
| Output signal | －10V～+10V |
| Voltage output load resistance | RL≥20kΩ |
| Supply voltage(Ue) | 20～35V DC |
| Power protection | Reverse protection of power supply |
| Current consumption | ≤40mA |
| Power supply mode | Independent power supply |
| Power connecting mode | Terminal |
| Depth | 114.5mm |
| Height | 99.0mm |
| Width | 22.5mm |
| Material | PA |
| Degree of protection | IP20 |
| Flammability rating | UL94/V0 |
| Colour | white |
| Electrical fast transient/burst immunity | According to:IEC 61326-1 |
| Surge immunity | According to:IEC 61326-1 |
| Radiated,radio-frequency,electromagnetic field immunity | According to:IEC 61326-1 |
| Electrostatic discharge immunity | According to:IEC 61326-1 |
| Immunity to conducted disturbances, induced by radio-frequency fields | According to:IEC 61326-1 |
| Immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | According to:IEC 61326-1 |
| Ambient temperature | -20℃~+60℃ |
| Storage temperature | -40℃～＋80℃ |
| Relative humidity | 10%～90% |
| Environmental requirements | The air should not contain any medium corrupting the coat of chrome,nickel and silver.Moreover,violent quiver and impact or any cause of electromagnetic induction (such as big current or spark,etc.)must be avoided when using |
| Conductor cross section solid range | 0.5~2.5mm² |
| Conductor cross section flexible range | 0.5~2.5mm² |
| Conductor cross section AWG min. | 12 |
| Conductor cross section AWG max. | 24 |
| Stripping length | 8mm |
| Screw thread | M3 |
| Connection method | Screw connection |
| Tightening torque min. | 0.5 Nm |
| Tightening torque max. | 0.6 Nm |
| Mounting type | DIN35mm |
